If you notice signs of rodents, for a few nights remove the feeder at dusk, replace it with a bucket mouse trap placed in the location when the feeder normally sits, and replace the feeder in the morning.Ģ. Feed set out 24/7 will potentially invite rodents. Please note that even though this feeder will auto-refill your birds’ feeder for an extended time (2-3 weeks, for my flock of 5-7 birds) you still need to check on your birds daily to make sure they have clean water and that the feeder is supplying fresh feed into a clean pan. Once the glue has cured, your feeder is ready to use! With the feeder still overturned, add a weight on top and allow the glue to cure for 24 hours. (so the center of the bottom of the feed pan has a bucket bottom glued to the top and bottom). Next flip the entire feeder (plus attached feed pan over) and take the riser we made from the bottom of bucket #3, coat the bottom with epoxy, turn over, and press onto the bottom of the feeder pan. A heavy-duty epoxy glue like Loctite Quickset works well to bond metal and plastic together solidly.Ĭoat the bottom of the column of buckets with epoxy and press firmly into the center of the feed pan. You can use screws (drywall screws will pierce metal and plastics) to attach the base, the feeder pan, and the silo together, however using a heavy-duty glue ensures there will be no sharp points protruding anywhere. If you require a dust and waterproof seal you can add caulking or expanding foam to the gaps between buckets. Add 2 more bolts in the same way to secure bucket #1 and bucket #2, then repeat the process to connect bucket #2.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |